Bimos ESD BASIC configure

460 - 630 mm

600 - 870 mm

Glides are particularly suited for workstations where a chair needs to offer firm support without sliding away, e.g. for activities that require a lot of strength. The glides are made of robust, abrasion-resistant plastic.

Castors are particularly suited for workstations that require flexibility and movement. The models are equipped with soft, load-dependent braked safety double castors for hard floors (e.g. concrete, tiles, etc.) as standard.

The artificial leather Skai ESD is particularly quick and easy to clean. It is hard-wearing, easy to clean, and resistant to oils and all commercially available disinfectants. The material is particularly soft and comfortable.

Duotec ESD is particularly well-suited to clean ESD environments. The upholstery is breathable and can absorb and release moisture. The ultra-soft surface ensures maximum seating comfort, even when sitting for long periods. Duotec ESD is extremely sturdy and can be cleaned with standard upholstery cleaning agents.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle. The seat can be continuously tilted forward. This allows a relaxed posture even when the upper body is leaning forward. Pressure on the thigh area is reduced, which promotes steady blood circulation.

The synchronous mechanism with weight adjustment ensures that when a user leans back, a combination of seat and backrest movements take place which support the lumbar spine in all positions. This mechanism facilitates active dynamic sitting, which in turn promotes a healthy posture. The counterpressure of the backrest can be freely adjusted.

The 4D armrests can be adjusted in height (110 mm), width (20 mm) and depth (60 mm) and can be swivelled in or out (+/-45°)

460 - 630 mm

600 - 870 mm

Glides are particularly suited for workstations where a chair needs to offer firm support without sliding away, e.g. for activities that require a lot of strength. The glides are made of robust, abrasion-resistant plastic.

Castors are particularly suited for workstations that require flexibility and movement. The models are equipped with soft, load-dependent braked safety double castors for hard floors (e.g. concrete, tiles, etc.) as standard.

The artificial leather Skai ESD is particularly quick and easy to clean. It is hard-wearing, easy to clean, and resistant to oils and all commercially available disinfectants. The material is particularly soft and comfortable.

Duotec ESD is particularly well-suited to clean ESD environments. The upholstery is breathable and can absorb and release moisture. The ultra-soft surface ensures maximum seating comfort, even when sitting for long periods. Duotec ESD is extremely sturdy and can be cleaned with standard upholstery cleaning agents.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle. The seat can be continuously tilted forward. This allows a relaxed posture even when the upper body is leaning forward. Pressure on the thigh area is reduced, which promotes steady blood circulation.

The synchronous mechanism with weight adjustment ensures that when a user leans back, a combination of seat and backrest movements take place which support the lumbar spine in all positions. This mechanism facilitates active dynamic sitting, which in turn promotes a healthy posture. The counterpressure of the backrest can be freely adjusted.

The 4D armrests can be adjusted in height (110 mm), width (20 mm) and depth (60 mm) and can be swivelled in or out (+/-45°)

460 - 630 mm

600 - 870 mm

Glides are particularly suited for workstations where a chair needs to offer firm support without sliding away, e.g. for activities that require a lot of strength. The glides are made of robust, abrasion-resistant plastic.

Stop & Go castors are also permitted for heights above 650 mm. The castors lock once someone sits down and therefore stop the chair from rolling away. When there is no load, they move freely and allow the chair to be moved easily. They therefore comply with the safety requirements of DIN 68877. Normal castors are not permitted above a height of 650 mm for safety reasons. The Stop & Go castors can also be retrofitted.

The artificial leather Skai ESD is particularly quick and easy to clean. It is hard-wearing, easy to clean, and resistant to oils and all commercially available disinfectants. The material is particularly soft and comfortable.

Duotec ESD is particularly well-suited to clean ESD environments. The upholstery is breathable and can absorb and release moisture. The ultra-soft surface ensures maximum seating comfort, even when sitting for long periods. Duotec ESD is extremely sturdy and can be cleaned with standard upholstery cleaning agents.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle. The seat can be continuously tilted forward. This allows a relaxed posture even when the upper body is leaning forward. Pressure on the thigh area is reduced, which promotes steady blood circulation.

The synchronous mechanism with weight adjustment ensures that when a user leans back, a combination of seat and backrest movements take place which support the lumbar spine in all positions. This mechanism facilitates active dynamic sitting, which in turn promotes a healthy posture. The counterpressure of the backrest can be freely adjusted.

The 4D armrests can be adjusted in height (110 mm), width (20 mm) and depth (60 mm) and can be swivelled in or out (+/-45°)

460 - 630 mm

600 - 870 mm

Glides are particularly suited for workstations where a chair needs to offer firm support without sliding away, e.g. for activities that require a lot of strength. The glides are made of robust, abrasion-resistant plastic.

Castors are particularly suited for workstations that require flexibility and movement. The models are equipped with soft, load-dependent braked safety double castors for hard floors (e.g. concrete, tiles, etc.) as standard.

The artificial leather Skai ESD is particularly quick and easy to clean. It is hard-wearing, easy to clean, and resistant to oils and all commercially available disinfectants. The material is particularly soft and comfortable.

Duotec ESD is particularly well-suited to clean ESD environments. The upholstery is breathable and can absorb and release moisture. The ultra-soft surface ensures maximum seating comfort, even when sitting for long periods. Duotec ESD is extremely sturdy and can be cleaned with standard upholstery cleaning agents.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle. The seat can be continuously tilted forward. This allows a relaxed posture even when the upper body is leaning forward. Pressure on the thigh area is reduced, which promotes steady blood circulation.

The synchronous mechanism with weight adjustment ensures that when a user leans back, a combination of seat and backrest movements take place which support the lumbar spine in all positions. This mechanism facilitates active dynamic sitting, which in turn promotes a healthy posture. The counterpressure of the backrest can be freely adjusted.

The 4D armrests can be adjusted in height (110 mm), width (20 mm) and depth (60 mm) and can be swivelled in or out (+/-45°)

460 - 630 mm

600 - 870 mm

Glides are particularly suited for workstations where a chair needs to offer firm support without sliding away, e.g. for activities that require a lot of strength. The glides are made of robust, abrasion-resistant plastic.

Castors are particularly suited for workstations that require flexibility and movement. The models are equipped with soft, load-dependent braked safety double castors for hard floors (e.g. concrete, tiles, etc.) as standard.

The artificial leather Skai ESD is particularly quick and easy to clean. It is hard-wearing, easy to clean, and resistant to oils and all commercially available disinfectants. The material is particularly soft and comfortable.

Duotec ESD is particularly well-suited to clean ESD environments. The upholstery is breathable and can absorb and release moisture. The ultra-soft surface ensures maximum seating comfort, even when sitting for long periods. Duotec ESD is extremely sturdy and can be cleaned with standard upholstery cleaning agents.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle. The seat can be continuously tilted forward. This allows a relaxed posture even when the upper body is leaning forward. Pressure on the thigh area is reduced, which promotes steady blood circulation.

The synchronous mechanism with weight adjustment ensures that when a user leans back, a combination of seat and backrest movements take place which support the lumbar spine in all positions. This mechanism facilitates active dynamic sitting, which in turn promotes a healthy posture. The counterpressure of the backrest can be freely adjusted.

The 4D armrests can be adjusted in height (110 mm), width (20 mm) and depth (60 mm) and can be swivelled in or out (+/-45°)

460 - 630 mm

600 - 870 mm

Glides are particularly suited for workstations where a chair needs to offer firm support without sliding away, e.g. for activities that require a lot of strength. The glides are made of robust, abrasion-resistant plastic.

Stop & Go castors are also permitted for heights above 650 mm. The castors lock once someone sits down and therefore stop the chair from rolling away. When there is no load, they move freely and allow the chair to be moved easily. They therefore comply with the safety requirements of DIN 68877. Normal castors are not permitted above a height of 650 mm for safety reasons. The Stop & Go castors can also be retrofitted.

The artificial leather Skai ESD is particularly quick and easy to clean. It is hard-wearing, easy to clean, and resistant to oils and all commercially available disinfectants. The material is particularly soft and comfortable.

Duotec ESD is particularly well-suited to clean ESD environments. The upholstery is breathable and can absorb and release moisture. The ultra-soft surface ensures maximum seating comfort, even when sitting for long periods. Duotec ESD is extremely sturdy and can be cleaned with standard upholstery cleaning agents.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle. The seat can be continuously tilted forward. This allows a relaxed posture even when the upper body is leaning forward. Pressure on the thigh area is reduced, which promotes steady blood circulation.

The synchronous mechanism with weight adjustment ensures that when a user leans back, a combination of seat and backrest movements take place which support the lumbar spine in all positions. This mechanism facilitates active dynamic sitting, which in turn promotes a healthy posture. The counterpressure of the backrest can be freely adjusted.

The 4D armrests can be adjusted in height (110 mm), width (20 mm) and depth (60 mm) and can be swivelled in or out (+/-45°)

460 - 630 mm

600 - 870 mm

Glides are particularly suited for workstations where a chair needs to offer firm support without sliding away, e.g. for activities that require a lot of strength. The glides are made of robust, abrasion-resistant plastic.

Castors are particularly suited for workstations that require flexibility and movement. The models are equipped with soft, load-dependent braked safety double castors for hard floors (e.g. concrete, tiles, etc.) as standard.

The artificial leather Skai ESD is particularly quick and easy to clean. It is hard-wearing, easy to clean, and resistant to oils and all commercially available disinfectants. The material is particularly soft and comfortable.

Duotec ESD is particularly well-suited to clean ESD environments. The upholstery is breathable and can absorb and release moisture. The ultra-soft surface ensures maximum seating comfort, even when sitting for long periods. Duotec ESD is extremely sturdy and can be cleaned with standard upholstery cleaning agents.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle. The seat can be continuously tilted forward. This allows a relaxed posture even when the upper body is leaning forward. Pressure on the thigh area is reduced, which promotes steady blood circulation.

The synchronous mechanism with weight adjustment ensures that when a user leans back, a combination of seat and backrest movements take place which support the lumbar spine in all positions. This mechanism facilitates active dynamic sitting, which in turn promotes a healthy posture. The counterpressure of the backrest can be freely adjusted.

The 4D armrests can be adjusted in height (110 mm), width (20 mm) and depth (60 mm) and can be swivelled in or out (+/-45°)

460 - 630 mm

600 - 870 mm

Glides are particularly suited for workstations where a chair needs to offer firm support without sliding away, e.g. for activities that require a lot of strength. The glides are made of robust, abrasion-resistant plastic.

Castors are particularly suited for workstations that require flexibility and movement. The models are equipped with soft, load-dependent braked safety double castors for hard floors (e.g. concrete, tiles, etc.) as standard.

The artificial leather Skai ESD is particularly quick and easy to clean. It is hard-wearing, easy to clean, and resistant to oils and all commercially available disinfectants. The material is particularly soft and comfortable.

Duotec ESD is particularly well-suited to clean ESD environments. The upholstery is breathable and can absorb and release moisture. The ultra-soft surface ensures maximum seating comfort, even when sitting for long periods. Duotec ESD is extremely sturdy and can be cleaned with standard upholstery cleaning agents.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle. The seat can be continuously tilted forward. This allows a relaxed posture even when the upper body is leaning forward. Pressure on the thigh area is reduced, which promotes steady blood circulation.

The synchronous mechanism with weight adjustment ensures that when a user leans back, a combination of seat and backrest movements take place which support the lumbar spine in all positions. This mechanism facilitates active dynamic sitting, which in turn promotes a healthy posture. The counterpressure of the backrest can be freely adjusted.

The 4D armrests can be adjusted in height (110 mm), width (20 mm) and depth (60 mm) and can be swivelled in or out (+/-45°)

460 - 630 mm

600 - 870 mm

Glides are particularly suited for workstations where a chair needs to offer firm support without sliding away, e.g. for activities that require a lot of strength. The glides are made of robust, abrasion-resistant plastic.

Stop & Go castors are also permitted for heights above 650 mm. The castors lock once someone sits down and therefore stop the chair from rolling away. When there is no load, they move freely and allow the chair to be moved easily. They therefore comply with the safety requirements of DIN 68877. Normal castors are not permitted above a height of 650 mm for safety reasons. The Stop & Go castors can also be retrofitted.

The artificial leather Skai ESD is particularly quick and easy to clean. It is hard-wearing, easy to clean, and resistant to oils and all commercially available disinfectants. The material is particularly soft and comfortable.

Duotec ESD is particularly well-suited to clean ESD environments. The upholstery is breathable and can absorb and release moisture. The ultra-soft surface ensures maximum seating comfort, even when sitting for long periods. Duotec ESD is extremely sturdy and can be cleaned with standard upholstery cleaning agents.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle.

The moving backrest follows the upper body and adapts to the respective working posture. This supports the spine in all sitting positions. If required, the backrest can be locked at any angle. The seat can be continuously tilted forward. This allows a relaxed posture even when the upper body is leaning forward. Pressure on the thigh area is reduced, which promotes steady blood circulation.

The synchronous mechanism with weight adjustment ensures that when a user leans back, a combination of seat and backrest movements take place which support the lumbar spine in all positions. This mechanism facilitates active dynamic sitting, which in turn promotes a healthy posture. The counterpressure of the backrest can be freely adjusted.

The 4D armrests can be adjusted in height (110 mm), width (20 mm) and depth (60 mm) and can be swivelled in or out (+/-45°)